slide show 1

We assist our value customer to design and develop their products by standing on the Creativity & Innovative foot. We manufacture the products of our customer with Quality Assurance, Delivery Accuracy & Cost Effectiveness.

Hot and cold water dispenser heating power 500W cooling power 112WThe hot and cold water dispenser has a heating circuit section. When the hot water tank is filled with water, the heating circuit is turned on, the electric heating tube heats up, the cold water gradually heats up, and the water is heated to the rated temperature of 95 ° C. stop working. If the water is not connected for a long time, the temperature of the hot water gradually drops to 85 ° C, the temperature controller contacts are closed again, the circuit is turned on, and the water is reheated to 95 ° C.

Hot and Cold Water Dispenser - OEM & ODM | JND Water

Look for original hot and cold water dispenser from JND Water. The flexibility from our OEM & ODM services would bring creativity and innovation to a new level.

Buying a hot and cold water dispenser requires a lot of thinking. After all, the unit must offer versatility and convenience. Besides, it should be able to stand the test of time. In this article, we are going to take a look at different types of hot and cold water dispensers and the things you should consider when buying one.

Type of Dispenser

Basically, you have to make a choice between two types of dispensers: Mains-fed and Bottle fed. Let’s look into both types.

Mains-fed: The water source for these units is the main water supply line. They are commonly used in footfall areas and can be an ideal choice for a public place or workplace.

Bottle fed: This type of unit gets water from a bottle that is on top of the dispenser. When you open the tap, water passes through a filtration system and goes out of the tap.

Temperature

The basic type of these units is designed to produce ambient or cold water as needed. Ambient water is room temperature water, not cold in that sense. A hot and cold water dispenser has a third option, which is hot water. So, you can make our brew a lot more easily.

Water Type

In some water dispensers, sparkling water is a common feature. Many of these feature different water temperature settings. They may offer the following combinations: Cold Ambient and cold Sparkling and cold Extra cold and hot Extra sparkling, cold and hot

Capacity

Capacity of these dispenses is shown in cups per hour. For instance, a unit may have the capacity to dispense 50 cups of chilled water in an hour while the same unit may dispense 90 cups of hot water per hour. Desktop or floor standing

Another thing to consider is the style of the unit. You can choose from a desktop or floor standing unit. Both types can meet the needs of a workplace. However, the countertop is a relatively smaller version and may cost less than the other.

The mains-fed units are not movable. Therefore, you may want to decide on a place to fix it.

Design

A hot and cold water dispenser is a well-designed machine that can complement different interiors. For instance, you can find units that are inspired by Greek columns that feature linear column details.

Alternatively, you can choose a minimalist, modern style that has curved smooth edges.

Apart from this, you can find these units in a lot of colors, such as white, black and grey, to name a few.

Buy or rent

Once you have considered all the factors, the final factor is to decide whether you should buy or rent one. Although there are pros and cons of both choices, buying is a better choice for a number of reasons. In short, this is the description of a hot and cold water dispenser. If you are going to buy one, make sure you consider the information given in this article. For a good supplier, you can check out JND Water.

image tooltip

PRODUCT PRELIMINARY PLAN

Discuss customer product shape and function requirements.

image tooltip

PRODUCT MODEL

Making product shape 3D drawing.

image tooltip

COMPONENT SAMPLE

Making product parts samples.

image tooltip

PRODUCT TEMPLATE

Making products.

AUDIT CONFIRMATION PLAN

AUDIT CONFIRMATION PLAN

Product appearance confirmation, product function confirmation.

COMPONENT MOLD

COMPONENT MOLD

Making product parts mold.

SAMPLE PRODUCTION

SAMPLE PRODUCTION

Small batch production.

FINAL DESIGN

FINAL DESIGN

Product appearance reconfirmed, product function reconfirmed.

PRODUCTION, SHIPMENT

PRODUCTION, SHIPMENT

Mass production and shipment of products.

CUSTOMIZE NOW

ShenZhen J&D Drinking Water Equipment Co.,Ltd.
Email: info@jndwater.com
Tel:+86-755-88321071
Whatsapp:+86-13823281855
Building 19, Ma Luan Jia De Industrial Park,67 TongFu West Road, PingShan District, ShenZhen, China.